Assembly
10
Assembly
WARNING!
Risk of injury!
If you use the product improperly, it may result in personal injury.
− Only use the product with sufficient weight on the base
(minimum 120 kg, not included). The product could tip over
and cause serious injury to bystanders.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Assemble the product on a soft and clean surface. Place a
blanket under the product to avoid scratching or damaging
the surfaces.
− Carefully follow all instructions when assembling the product.
Assembly steps
Assemble the product following the instructions and illustrations below.
• At least two competent persons should assemble the product to
make assembly easier and avoid injury.
• Begin the assembly of the product close to the intended use location.
The product is heavy and may be difficult to move after assembly.
• The enclosed hex keys
22
/
23
are required for the assembly.
1 Separating the support pole sleeve from the support pole ........................... 11
2 Setting up the swivel unit ............................................................................... 11
3 Assembling the support pole and other parts ................................................12
4 Attaching the base cover and base weights ...................................................13
5 Connecting the support pole sleeve to the support pole ...............................13
6 Attaching the umbrella pole to the support pole ...........................................14
7 Securing the umbrella pole .............................................................................14
8 Attaching the crank handle (1) ........................................................................15
9 Attaching the crank handle (2) .............................................................................15
