background image

10

11

Safety

−  Before each use examine the car jack. If you notice loose parts 

or damage, do not use the car jack. In this case, do not use the 

car jack; a qualified professional should examine it.

−  The car jack should only be used for the lifting and lowering 

of vehicles; a lifted vehicle should be supported on a support 

device with an adequate load capacity. If the car jack is being 

used as a support device for a vehicle, it can be damaged and 

lead to personal injury.

−  When the vehicle is on the car jack, do not move it. The car jack 

cannot handle such a strain, which can lead to personal injury 

and/or material damage.

−  Do not alter the car jack. Do not open the casing. The car jack 

does not have parts which the user can fix or change. If the 

user fixes or incorrectly or inappropriately uses the product, the 

warranty is not valid. In case of repair, contact the manufacturer 

through the authorised repairer detailed on the warranty 

certificate.

−  For repairs, only original parts for the car jack may be used. 

The car jack contains mechanical parts which are important to 

protect it from damage.

−  Do not alter the car jack and do not add parts.
−  Only move the car jack when holding the carry handle, 

ensuring that it is appropriately attached to the car jack.

−  Only use the car jack in dry weather conditions and in a dry 

environment.

−  Do not use the car jack in humid indoor areas or in the rain.
−  Never store the car jack in an area where it may fall.
−  Do not put objects in the casing.
−  Do not overload the car jack beyond the rated capacity.
−  Only use the car jack on firm, level surfaces. Do not place the 

Safety

−  The car jack should only be used for lifting and lowering vehicles.

DANGER!

 

 

Danger of personal injury!

To avoid danger, the car jack and the vehicle must always be 

monitored during use. Failure to do so could lead to serious 

personal injury or even death.
−  Ensure that the car jack and the vehicle are stable. The car jack 

must be placed on a firm, stable, flat and level surface.

−  Ensure that during lifting and lowering the car jack is able to 

rotate.

−  Never lift a vehicle whose total weight exceeds 2 tonnes, even 

for a short length of time.

−  Ensure children and animals are kept away whilst the vehicle is 

on the car jack.

−  Never lift the vehicle if there are passengers inside,
−  Make sure the load is supported in the centre of the saddle.
−  Support the vehicle with support devices with an adequate 

load capacity and before carrying out work on the vehicle, 

remove the car jack.

−  When the vehicle is supported by only the car jack, no one 

should be under the vehicle.

WARNING!

 

 

Danger of personal injury!

Before use, the car jack user must fully understand how the car 

jack functions and the full process for its safe use. Failure to do so 

can lead to serious personal injury.
−  Before lifting a vehicle, read the vehicle instructions.
−  Whilst using the car jack always wear appropriate personal 

protective equipment.

Summary of Contents for AutoXS FLX-WH-01













Reviews: