background image

24

25

CLEANING AND STORING

NOTICE!

 Danger due to incorrect use!

With inappropriate handling, the car jack can be damaged.
−  Do not use abrasive cleaning products, brushes with metallic 

or nylon bristles, sharp or metallic cleaning aids, such as 

knives, hard scrapers and so on. They can cause damage to the 

exterior.

−  Always store the car jack safely. The car jack should not be 

stored in a position from which it could fall.

−  The car jack should be cleaned with a lightly oiled cloth.
−  Always ensure that the lifting arm 

5

 is fully lowered and that 

the jack handle handle 

8

 is safely attached to the car jack in 

the jack clips 

12

 (see 

picture A).

−  Store the car jack in a cool, dry place, away from direct sunlight 

and extreme temperatures (hot or cold), weather conditions 

(such as rain) and chemicals and destructive fumes.

−  Store the car jack in a safe place, away from children and 

animals.

Cleaning and storing

Changing oil

•  Check the oil at least once a year; if dirt or foreign objects 

are noticed, change the oil.

•  If using the car jack regularly, the oil should be checked 

regularly.

1.  Fully release the car jack and ensure that the release valve 

10

 is 

turned clockwise, then lift the cover plate 

6

.

2.  Carefully lift and with a screwdriver, remove the oil filler plug 

16

 

of the oil reservoir 

17

.

3.  Stand the car jack up so that the used oil runs out of the oil 

reservoir, then dispose of the oil in accordance with local 

regulations.

4.  Clean spilled oil from the car jack.
5.  Whilst the car jack is standing, add the recommended oil (see 

the “Technical details” section), so that the reservoir piston is 

covered.

6.  Clean the oil filler plug and replace it in the oil reservoir 

ensuring that it is firmly back in its place.

Maintenance, repair and inspection

Summary of Contents for AutoXS FLX-WH-01













Reviews: