Heart Rate Monitor
Contact Data
AFTER SALES SUPPORT
[email protected] / www.produktservice.info
1-800-493-9137
23
What can be the reason why the display of my heart rate monitor is no longer
responding?!
If the display is “frozen” or irregular symbols appear:
-
Press and hold the “SEL” and “SET” key simultaneously for approx. 2 seconds.
All display segments will briefly appear and you will reach the default settings
again (see point 5 “Main functional modes”).
-
Alternatively: Remove the battery and reinsert it. This will reset the
microprocessor.
-
Please pay attention to the small spring protruding from the movement. Handle it
carefully so that this spring is not lost.
After this, heart rate monitor should function normally again.
The display is weak, barely readable, what can I do?
Replace the battery as soon as the display becomes weaker or fades entirely. When
inserting the new battery, always pay attention to the correct polarity. If the battery
needs to be removed and reinserted, the personal data will need to be re-entered.
Why is the display light not working?
Is the battery perhaps depleted? Please check the battery. If it is depleted, replace it
with a new one (3V / CR2032). Please pay attention to the +/- terminal.
Why is an incorrect average heart rate displayed after training?
This is probably because you did not stop the timer (stopwatch) in heart rate mode,
but are no longer wearing the chest strap. In this case, the heart rate monitor is no
longer receiving a heart rate from the chest strap, so that the watch is calculating with
the heart rate value of 0. This allows the average heart rate fall further and further.
Therefore, after
training
, stop the timer (stopwatch) in order to obtain a meaningful
heart rate.
Why are the times specified within, above and below the training zone not
correct?
This is probably because you did not stop the timer (stopwatch) in heart rate mode
after training. That is why the time for these values continues to run. Please stop the
timer (stopwatch) in heart rate mode after training.
7. CONTACT DATA
