Replacing the interior light
21
− If necessary, wipe out the condensation drip tray
6
at the bottom of the
appliance.
In case of heavy soiling, unscrew the drip tray and clean it with water and a mild
detergent. Then screw the drip tray back onto the underside of the appliance
using the four fi xing screws.
Replacing the interior light
CAUTION!
Risk of injury/damage to the appliance!
The replacement of the LED interior light
9
is the responsibility
of the manufacturer, its customer service or a similarly qualifi ed
person.
− If the interior light does not work, contact customer service.
Transport
− Disconnect the appliance plug from the mains socket.
− Remove all bottles and bottle racks
8
from the inside of the appliance.
− Fully screw in the adjustable foot
7
.
− Tape the door shut.
− To avoid damage during transport, we recommend that you use the original
packaging.
Troubleshooting
Faults may occur during operation.
− Please use the following table to check whether you can resolve the problem
yourself.
All other repairs are prohibited and will invalidate the warranty cover.
− Therefore, in the event of a fault, contact the Service Centre.
