Turning the motor on and off
Caution! Blade keeps moving
The motor is activated by means of a safety switch. When you let go of the safety bar,
the motor stops. Only turn on the motor on the grass.
1. Place the device on the grass.
2. Press and hold the button of the safety switch
16
.
3. Pull the safety bar
17
towards the handle.
The motor starts.
4. Let go of the safety switch button and keep the safety bar pressed to the handle
as long as you operate the motor.
Letting go of the safety bar stops the motor. The blade keeps running. Wait until the
blade has stopped before handling the device.
Emptying the collecting bag
The collecting bag has a fill level indicator
14
. The fill level indicator rises when the
motor is running and the collecting bag is empty. Once the collecting bag is full, the
fill level indicator rests again on the collecting bag. Empty the collecting bag.
If cuttings remain on the ground, empty the collecting bag as well.
1. Stop the motor and wait until the blade stands still.
2. Lift the discharge flap
13
until the collecting bag
5
is exposed.
3. Lift the collecting bag
5
off the lawn mower.
Slightly lift the collecting bag to release it.
4. Move the discharge flap
13
properly until the discharge chute is covered again.
Do not simply let go; the discharge flap may get damaged due to the spring
action.
5. Empty the collecting bag
5
completely.
Clear cuttings of the fabric as best as possible so that the expelled air can escape
properly.
6. Completely lift the discharge flap
13
.
7. Hang the collecting bag
5
onto the hooks above the discharge chute again.
8. Check whether the collecting bag is properly fitted
5
.
9. Move the discharge flap
13
carefully until the collecting bag
5
is covered
again.
Operation
15
