ALDI 44268 User Manual Download Page 14

1100W Garden Pump

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №. 

XKJ-1109PE  •  1/2018  •  44268

(toll free)

AFTER SALES SUPPORT

(toll free)

1100W Garden Pump

e-mail: [email protected]

1800 909 909

MODEL: №. 

XKJ-1109PE  •  1/2018  •  44268

24

25

AG.

AH.

Operating your Pump

This garden pump has 4 operating modes which 

can be selected by using the LCD display screen (9) 

with the “MODE” button (Fig AF).

Selecting the appropriate Mode  

for your application: 

You can select one of the four operating modes 

using the “MODE” button on the LCD display  

screen (9).
The modes are explained here in the same order of 

the number of times you press the “MODE” button. 

i.e Press “MODE” button once you get “Automatic” 

mode etc ; the fourth time pressed you will return 

to the “Power on” mode.

Power on 

When you turn the power on at the mains power (Fig AG), your pump is 

ready to choose an operating mode.
There is no need to press any buttons on the LCD display screen. The pump 

is in power on mode (Fig AH). Power is connected and there is no pumping 

action or flow.

AF.

PRESS MODE BUTTON 

TO SELECT MODES

ACTION

DISPLAY WILL 
SAY

PUMP 

ACTION

IMAGE 

REFERENCE

TURN ON POWER AT MAINS    Power On

Pump Off 

Fig AH

Press MODE button 1 X

Automatic Mode

Pump Starts

Fig AI 

Press MODE button 2 X

Timed Mode 

Pump Off

Fig AL

Press MODE button 3 X 

  Timed Mode Not set Pump Off 

Fig AL

Press MODE button 4 X

Ever-On Mode

Pump Starts

Fig AT

Press MODE button 5th Time

Returns to Power 
On

Pump Off

Fig AH

Summary of Contents for 44268






















Reviews: