1100W Garden Pump
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL: №.
XKJ-1109PE • 1/2018 • 44268
(toll free)
AFTER SALES SUPPORT
(toll free)
1100W Garden Pump
e-mail: [email protected]
1800 909 909
MODEL: №.
XKJ-1109PE • 1/2018 • 44268
18
19
P.
3/4” BSP
Elbow Adaptor*
Fitting
3/4” BSP threaded
outlet adaptor
(11) (supplied)
*
*
N.
O.
Elbow Adaptor*
3/4” BSP
Fitting
3/4” BSP threaded
outlet adaptor
(11) (supplied)
*
*
O Ring
Adaptors, reducing nipples and elbows
are all available from most hardware /
plumbing stores and starting off with a
¾” BSP male fitting will get you started.
The following is a guide for the
use of the adaptor.
• Remove the protective cover on the
thread of the outlet of the pump.
• Making sure the “O” ring is fitted to the
shoulder of the outlet fitting adaptor,
thread the fitting into the outlet of the
pump sufficient to compress the “O”
ring firmly (Fig N).
NOTE: Teflon tape is NOT required
on the thread of the adaptor into the
pump.
You now need to determine if your
plumbing requirements are ¾“ BSP
or larger.
ALSO NOTE: Teflon tape (13) (not
supplied) should be applied to all other
threaded connections on the outlet side
of the adaptor provided.
Using the adaptor with
additional fittings.
Using with pipe work at ¾” BSP. For the ¾“
BSP adaptor outlet, you need to purchase
a ¾” BSP male fitting, being either an
elbow or straight nipple so as to enter the
adaptor. The other end of the fitting you
purchase will need to match the threaded
pipe you are connecting to (Fig O).
OR you may use a fitting to connect
directly to a poly pipe in a horizontal
position (Fig P).
Pressure line connection.
IMPORTANT: ONLY use either of the two adaptors (10 & 11) supplied with
the pump for a pressure line connection.
DO NOT purchase any other fitting and attempt to screw directly into the
pump.
Other purchased fittings can ONLY be screwed directly into the 3/4” BSP
threaded outlet adaptor (11) provided.
1. The pressure line* (should be at least 19mm (3/4”)) must be connected
to the pump’s pressure outlet (5) either directly or via a threaded nipple
using the supplied adaptors only.
2. The 19mm straight hose outlet adaptor (10) will accept a 19mm hose. The
threaded 3/4” BSP 20mm threaded outlet adaptor (11) will accept pipe
fittings with a 3/4” BSP (20 mm) thread, either for hard plumbing or hose
applications.
3. A 13 mm (1/2”) pressure hose* can also be used with the appropriate
screw connections, but this will only reduce the flow rate.
Fitting and using the supplied 3/4” BSP threaded outlet
adaptor (11).
This fitting is used to connect the output of the pump to various hard
plumbed threaded applications or hose fitting applications.
The outlet of the adaptor is ¾” BSP. Many variations of threads and fittings
can be purchased from your local hardware / plumbing store to suit the
application required.
* Additional fittings as shown in pictures are NOT supplied with this garden pump.
* Additional fittings as shown in pictures are NOT supplied with this garden pump.
