manualshive.com logo in svg

ALDI 10367, User Manual, Page: 26 / 32

Share
Download
ALDI 10367 User Manual Download Page 26

18V Rotary Grinder

AFTER SALES SUPPORT

(toll free)

MODEL No.: DC-180E-1 • 07/2019 10367

e-mail: [email protected]

AUS

24

 1300 889 028

AUS

Maintenance

WARNING: Remove the plug of the adapter from the 

socket before carrying out any adjustment, servicing or 

maintenance. 

● 

Remove any cuttings from the tools. If necessary, use a fine brush or 

paintbrush to remove dirt and cuttings.

● 

Keep the ventilation openings of the machine free of any dust, 

cuttings and other contamination in order to prevent the machine 

from overheating. Use a brush or a paintbrush for cleaning.

● 

Make sure that the housing is clean at all times. If necessary, wipe 

down the machine with a slightly damp, soft cloth. Then dry it with 

a soft cloth.

● 

It is not necessary to lubricate any moving parts of the machine.

● 

Check the machine and accessories for any damage. If there is any 

damage, the machine and accessories may not be used. Do not try to 

repair any defective parts yourself. In the event of damage, please 

immediately contact our customer service department or visit an 

authorized workshop to guarantee your own safety.

● 

Store the machine, the adapter and the accessories in a dry, 

clean place which is protected from the effects of weather and 

temperature and is out of the reach of children and animals.

Summary of Contents for 10367

































Reviews:

No comments