2.
WARMING UP, PLEASE WAIT….
3.
BLOW STEADILY UNTIL TONE ENDS
"SAMPLING"
4.
SAMPLING IS COMPLETED.
"ANALYZING"
If you stop blowing or you do not breathe strongly enough, “
Flow Error
” will be
displayed on LCD.
The device does not sense a proper breath sample, please wait and try again and
the machine will return to the waiting mode.
This process will continue until you finally obtain a correct result.
5.
Display the result
When the measurement is complete, the blood alcohol concentration will appear on
the LCD display.
Then the guide will indicate whether or not you can drive, aided by lamplights.
*The message for each level is;
Good
Very little or no alcohol has been detected.
Don't drink and drive!
Warning
A moderate amount of alcohol has been detected.
Don't drink and drive!
Danger
A high level of alcohol has been detected.
Don't drink and drive!
Precautions
1.
During testing, any alcohol traces left in your mouth will increase the value of the
blood alcohol concentration level. Remove these traces before testing. Highest
