23
May 7, 2020
ACCESSORIES
DEVELOPMENT KIT
Part Number: DEVKIT-RIDEAMP
We offer this kit to enable users to quickly bench test or build mockups with RideAmp units. This kit includes
prefabricated cables for each of the connectors on the unit. It also includes a 24V/20A DIN Rail power supply to
power up the unit.
We recommend that new users order at least one of these kits to get started with RideAmp development. Since
most on-board audio applications use highly customized cabling, this kit is probably not practical for wiring up an
entire fleet of ride vehicles.
CONNECTOR KIT
Part Number: CONKIT-RIDEAMP
This kit provides a full set of blank Molex connectors and pins for RideAmp’s connectors. We offer this kit as a
convenience to fabricators so that the individual parts don’t have to be researched and ordered. Unlike the
Development Kit, the Connector Kit is intended to be used for fleet deployments. We recommend ordering a
Connector Kit for each RidePlayer in the ride vehicle fleet.
M12 X-CODED ETHERNET CABLE
Part Number: CM12X-2M
This is an M12 X-Coded patch cable that allows RideAmp to connect to an M12 X-Coded Ethernet switch or
other device like RidePlayer. Our stock cable is 2 Meters (6.5ft) in length. For fleet deployments, we have the
capability to manufacture cables to custom lengths to suit your application. Please contact us for quotes for custom
length M12 X-Coded cables.
M12-TO-RJ45 ETHERNET ADAPTER
Part Number: CM12X-RJ45F
This is an adapter that converts from the M12 X-Coded connectors of RideAmp to a standard RJ45F Ethernet
connector.
POWER SUPPLY
Part Number: PSD24V20A
This supply is capable of providing RideAmp with a 24VDC/20A power source. It accepts an input between 100-
240VAC and is designed to mount on a DIN Rail alongside the RideAmp.
