19
May 7, 2020
ENABLING AES67 NETWORK AUDIO INPUT
The default mode of the network audio interface is Dante, however it is very easy to enable the use of AES67
using the Dante Controller application.
You can follow these steps to configure RideAmp to accept AES67 inputs:
1.
Launch Dante Controller
2.
Click on the “Device info” tab and double click on the RideAmp.
3.
Click on the
AES67 Config
tab, enable AES67 using the box shown below, and then click
Reboot
.
4.
Congratulations! Your RideAmp-350Q can now be configured to receive incoming AES67 flows!
