April 2, 2004 • Alcorn McBride MP3 Audio Machine User’s Manual • Rev H •
Page 17
Command bytes:
PL<CR>
Message Response:
R<CR>
Completion Response:
<CR>
Loop Play
Description:
This command causes the MP3 Audio Machine to play the file specified by the Select
File command and loop back to the beginning. If the file is a Play List, all of the
tracks in the Play List will be played and then the entire Play List will be restarted.
Command bytes:
LP<CR>
Message Response:
R<CR>
Pause
Description:
This command causes the MP3 Audio Machine to pause. Play will resume from
where it left off whenever another Play command is issued unless a Select File
command is issued, in which case the new file will play from the beginning.
Command bytes:
PA<CR>
Message Response:
R<CR>
Comments:
If a Select File command is issued while in Pause mode, playback will start from the
beginning of the selected file whenever another Play command is issued.
Reset
Description:
This command causes the MP3 Audio Machine to stop, just as if the parallel Stop
input had been activated.
Command bytes:
RJ<CR>
Message Response:
R<CR>
