Alcor AU9510, Technical Reference Manual

Page: 21 / 30

ELECTRICAL CHARACTERISTICS 17
6.6. USB Transceiver Characteristics
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER CONDITIONS LIMITS UNIT
MIN MAX
V
CC
DC supply voltage 3.0 3.6 V
V
I
DC input voltage range 0 5.5 V
V
I/O
DC input range for I/Os 0 V
CC
V
V
O
DC output voltage range 0 V
CC
V
T
AMB
Operating ambient temperature
range in free air See DC and AC
characteristics for
individual device 0 70
˚
C
ABSOLUTE MAXIMUM RATINGS (Notes 1 and 2)
In accordance with the Absolute Maximum Rating System, Voltages are referenced to GND (Ground=0v)
SYMBOL PARAMETER CONDITIONS LIMITS UNIT
MIN MAX
V
CC
DC supply voltage -0.5 +6.5 V
I
IK
DC input diode current Vi<0 -50 mA
V
I
DC input voltage Note 3 -0.5 +5.5 V
V
I
/
O
DC input voltage range for I/Os -0.5 Vcc
+0.5 V
I
OK
DC output diode current Vo> Vcc or Vo<0 +/-50 mA
V
O
DC output voltage Note 3 -0.5 Vcc
+0.5 V
I
O
DC output source sink current for
VP/VM and RCV pins Vo=0 to Vcc +/-15 mA
I
O
DC output source or sink current
for D+/D- pins Vo= 0 to Vcc +/-50 mA
I
CC
, I
GND
DC Vcc or GND current +/-100 mA
T
STO
Storage temperature range -60 +150
˚
C
P
TOT
Power dissipation per package mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress
ratings only and functional operation of the device at these or any other conditions beyond those
indicated under "Recommended Operating Conditions" is not implied. Exposure to absolute
maximum rated conditions for extended periods may affect device reliability.
2. The performance capability of a high performance integrated circuit in conjunction with its thermal
environment can create junction temperatures which are detrimental to reliability. The maximum
junction temperature of this integrated circuit should not exceed 150
˚
C.
3. The input and output voltage ratings may be exceeded if the input and output clamp current ratings
are observed.