ALcom G-1100, User Manual

Page: 8 / 68

Note: The position of and [[ SEND ]] is different by different
telephone.
Key description:
[[ ]]: Press it to perform the functions show at the left-hand side of the
display.
[[ ]]: Press it to perform the functions show at the right-hand side of
the display.
[[ ▼ ]]: At stand-by status, press it to enter call log. At menu status,
press it to go up the menu; during a call press it to increase volume.
[[ ▲ ]]: At stand-by status, press it to enter messages status. At menu
status, press it to go down the menu; during a call press it to decrease
volume.
[[ MUTE ]]: During a call, press it to turn on or off the transmitter.
[[ HANGUP ]]: At menu status, press it to return stand-by interface;
when dialing, press it to end dialing; during a call, press it to end the call;
press it to refuse an incoming call.
[[ OK ]]: Press it to carry out the function on the right-hand side of the
display.
[[ CANCEL ]]: Press it to carry out the function on the left-hand side of
the display.
: Press it to dial a speaker call, at stand-by status; press it to make
a speaker call with an on-hook dialing; press it to end a speaker dialing;
press it to end a speaker call; If you choose autocall (“Menu
→
Setting
→
Autocall”) 2-10 seconds after dialing, you will be automatically connected
with the number you dial.
[[ SEND ]]: After entering telephone book, press it to make an outgoing
call. Press it to call the current number in the telephone book.
[[ 0 ]]-[[ 9 ]]: Press the keys to enter numbers to make handset dialing
or on-hook dialing; At menu status, press the keys to choose
corresponding menu. After the first number dialed, press ‘0’ for a few
seconds to have a ‘+’ entered.
[[ * ]]: Press it to input ‘*’.
[[ # ]]: Press it to input the ‘#’.
Note: The Function of the keys above at input status, please refer to Input
Mothod description.
4.2 Menu Function
When talking, press [menu], user could do some operation about
switching calling, PB, message etc.
-
Switching calling: You can create a new call with holding current
call. Need net service.
-
PB: User could do operation of the phone book.
-
Message : User could receive message, send message and save
8