ALcom AT-5928, User Manual

Page: 5 / 11

4. When finished, return the handset to the base.

From Hands free mode
1.
Press H.F key
2. When you hear the dial tone, dial the desired number.
3.
The unit will start to time the conversation after 6 seconds.
4.
When finished, press H.F key again.
 Pre-dialing function
1. When the handset is on the base, dial the desired number.
2.
If there are mistakes, use the DEL key to edit.
3.
Press H.F key or pick up the handset and the number will be dialed automatically.
 Redial:
1.
Pick up the handset or press H.F key,
2.
Press REDIAL key, the last dialed number will be dialed again
 Auto-redial: (this function just for your selection)
1.
Press H.F key, dial a number, if you hear an engaged tone.
2.
Press ARD key and the last dialed number will be redialed automatically at every 9-10
seconds until the line is through.
3. The phone will redial the same number automatically for 32 times.
When there is an incoming call while using auto-redial, pick up the handset or press H.F key to
answer the call. The auto redial function will be terminated.
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
 Reviewing
On-hook state. Press UP/+ or DOWN/- key to scroll and review the numbers.
 Deleting
When the desired number is shown, press DEL key, the number is deleted.
Press and hold DEL key for 3 seconds; all the incoming numbers are deleted.
 Calling back
1.
Scroll to the desired number, press H.F key or pick up the handset, and the number is
dialed out, or
2.
Press REDIAL key, LCD displays PICK UP ,
3.
Press H.F key or pick up the handset, the number is dialed out.
NOTE: If the PABX code is set, the telephone will add the code before the number automatically
when dialing back the number. It will dial the PABX code first and then after a 2 second pause
and then dial the number.
NEW INCOMING CALL LED AND RINGING LED
New and ring indicator is the same LED, when a new call comes in, the LED is blinking, when a
new number has not been reviewed, the LED is blinking in 4s interval.
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1.
In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF,
2.
Press ALARM key again, LCD displays DATE ON ,
3.
Press SET key to quit.
5