INSTRUCTION MANUAL
8
All breath test results are recorded in
memory and are downloaded during routine
monitoring appointments. Any instance of
alcohol detected in the breath samples may
be considered a program violation. Refer
to your Compliance Guide for program
conditions.
When you have started the vehicle engine,
Drive safely
is displayed.
WARM-UP AND STANDBY (WHERE APPLICABLE)
If applicable, you can place the
ALCOLOCK GR device in warm-up mode
by pressing the centre navigation button.
Warm-up
is displayed and the vehicle
engine can remain idle without requiring
another breath test for an allotted time
(refer to your Compliance Guide – default
is 30 minutes). After the allotted time, the
warm-up mode automatically terminates
or you can manually exit warm-up mode
by pressing the centre navigation button
or pressing the gas pedal. A retest is then
required. Depending on the jurisdictions, a
standby feature is similarly available.
RESTART WITHOUT BREATH TEST
If the vehicle engine is turned off for a short time, you can
restart it without providing another breath test. This safety
feature is helpful if the motor stalls. Refer to your Compliance
Guide for the restart time limit.
Before restarting the vehicle engine, observe one of the
following messages on the handset:
