REF: WM4 User Manual V7.docx
Page 10
© Alcolizer Technology
3
Installation Procedure
3.1
Installing the Back Plate
3.1.1
Mounting location
When choosing a suitable mounting location, the following factors should be considered:
•
The instrument must be mounted on a wall or structure that can support the weight
of the instrument.
•
The instrument must not be exposed to rain or water.
•
The instrument should be mounted near to a mains power socket to allow for easy
connection.
•
Under extremely heavy use, the instrument could discharge excess saliva from a vent
on the bottom of the main unit. Avoid mounting the instrument above anything that
could be affected by moisture (e.g. power points).
•
The instrument must not be exposed to extreme temperatures outside of the
defined operating range.
3.1.2
Mounting height and position
The instrument must be mounted and positioned at a height to accommodate the majority
of users and in such a way to allow access to the key lock and to allow the machine to swing
open.
WARNING
The WM4 weighs 18kg.
Use two man lift procedures when mounting and removing from back plate.
When the unit is open or not installed on the back plate, electrical components are exposed.
Ensure electrical power is isolated at the supply power point whenever the unit is open unless
specifically required for special troubleshooting requirements.
