ALCO EC3-33x, User Manual

Page: 14 / 23

EC3-33x Coldroom Controller with EX5
User Manual
EC3-33x
A.6.5.063E - Rev 4
14
Emerson Electric GmbH & Co - ALCO CONTROLS - Heerstr. 111 - D-71332 Waiblingen - Germany - Tel.: ..49 (0) 7151 509 0 - Fax: 49 (0) 7151 509 200
Configuration Parameters
Thermostat UNVT_THERMOSTAT
Code Description
Variable type
Name Unit Min Max Default Res. IR Kb Lon
0 A0 Mean alarm factor unsigned short MeanAlarm % 0 100 100 y y y *1
1 A1 Low limit delay unsigned short LowAlarmDelay min 0 180 5 y y y Low limit temperature alarm delay
2 A2 High limit delay unsigned short HighAlarmDelay min 0 180 5 y y y High lim
3 A3 High limit defrost delay unsigned short DefAlarmDelay min 0 180 10 y y y High limit temperature alarm delay for defrost
4 Ad Door alarm delay unsigned short DoorAlarmDelay min 0 180 2 y y y Alarm delay for door contact and restart time for cooli
5 AH High limit temperature signed short HighLimTemp °C AL 70 40 y y y High temperature limit
6 AL Low limit temperature signed short LowLimTemp °C -50 AH -40 y y y Low temperature limit
7 At Type of alarm limits unsigned short AlarmLimit 0 1 0 y y y *7
8 r0 Door contact function unsigned short DoorContact 0 15 6 y y y *2
9 r1 Min setpoint value signed short MinSetPoint °C -40 r2 -40 y y y Min cut out threshold
10 r2 Max setpoint value signed short MaxSetPoint °C r1 60 40 y y y Max cut out threshold
11 r3 Day night control unsigned short DayNightCtrl 0 1 1 y y y 0 = off, 1 = on
12 r4 Thermostat mode unsigned short ThermMode 0 4 1 y y y *3
13 r6 Setpoint night operation signed long SpNight °C r1 r2 4 0.1 y y y Setpoint for night operation, controled by nv and r3
14 r7 Difference night operation unsigned short DiffNight K 0.1 20 2 0.1 y y y Difference for deadband calculation
15 r8 Mean factor day operation unsigned short MeanDay % 0 100 100 y y y *4
16 r9 Mean factor night operation unsigned short MeanNight % 0 100 50 y y y *5
17 rd Difference day operation unsigned short DiffDay K 0.1 20 2 0.1 y y y Diff. between cut in & cut out
18 St Setpoint day operation signed long SpDay °C r1 r2 2 0.1 y y y Setpoint for day operation, controled by nviDayNight a
19 Sensor selection unsigned short Sensor 0 3 0 n n y *6
Total 22 bytes
*1 Calculation : nvoAlarmAirTemp = ReturnTemp -(ReturnTemp - DischargeTemp)*MeanAlarm/100
*2 DoorContact = C Alarm + Timer + Action
Cooling 0 = cooling when door open
1 = no cooling when door open
Alarm 0 = alarm on when door open
2 = alarm off when door open
Timer 0 = Timer not startet when door open
4 = Timer startet when door open
Action 0 = alarm activated when timer over
8 = alarm activated and cooling restartet when timer over
*3 0 = off
1 = cooling, DB thermostat
2 = cooling, Mod. Thermostat
3 = heating, DB thermostat
4 = external control, controller follows nviValve
*4 Calculation : nvoAirTemp = ReturnTemp -(ReturnTemp - DischargeTemp)*MeanDay/100
*5 Calculation : nvoAirTemp = ReturnTemp -(ReturnTemp - DischargeTemp)*MeanNight/100
*6 0 = Sensors internal
1 = Discharge air temperature sensor from LON network
2 = Return air temperature sensor from LON network
3 = both air sensors from LON network
*7 0 = Alarm limits absolute
1 = Alarm limits relative to set point
Alarm Messages
Alarm messages will be send by the “nvoAlarm” of the node object.
Condition SNVT # Alarm Value Message Priority
Low temperature alarm occurs 105 nvoAlarmAirTemp AL_LOW_LMT_ALM_1 PR_LEVEL_3
Low temperature alarm disappears 105 nvoAlarmAirTemp AL_LOW_LMT_CLR_1 PR_LEVEL_0
High temperature alarm occurs 105 nvoAlarmAirTemp AL_HIGH_LMT_ALM_1 PR_LEVEL_3
High temperature alarm disappears 105 nvoAlarmAirTemp AL_HIGH_LMT_CLR_1 PR_LEVEL_0
Emergency alarm condition occurs 105 nvoAirTemp AL_ALM_CONDITION PR_LEVEL_3
Emergency alarm condition disappears 105 nvoAirTemp AL_NO_CONDITION PR_LEVEL_0
Door open alarm condition occurs 22 nviDoor AL_ALM_CONDITION PR_LEVEL_3
Door open alarm condition disappears 22 nviDoor AL_NO_CONDITION PR_LEVEL_0