LOUDSPEAKER CONNECTION
As with all connections ensure that the equipment is switched off before you attempt to connect any cables.
L
OUDSPEAKER
O
UTPUT
The Product
8
Power Amplifier has a bi-wiring facility and will allow you to connect your loudspeaker cables to
your loudspeakers via either a 4mm banana type plug, a spade or bare wire type connection. If you are using the bare
wire method make sure that all the strands of cable are securely within the binding post before you switch on your
amplifier. The Red terminal is for your positive (+) connection and the BLACK terminal is for your negative (-)
connection. If you fail to observe this pattern your system may result in an ‘
out of phase
’ condition, giving you poor
results in sound quality.
L
OUDSPEAKER
M
ATCHING
The most common misunderstanding in matching amplifiers with loudspeakers is with power handling.
When amplifiers are given a power rating, this refers to the maximum output. The maximum usable output will
usually be reached at about 1 - 2 o'clock on the volume control, leaving enough reserve power to cope with transients
and crescendo's. This limit is also dependant on such things as source output levels and loudspeaker sensitivity. If an
amplifier is driven beyond this limit it will 'clip' (literally clipping the wave form), resulting in distortion. It is this
distortion that usually damages loudspeakers, and not a mis-match in power ratings. If you are in any doubt about the
suitability of your amplifier to drive your loudspeakers, please consult your dealer.
GENERAL CARE
A L C H E M I S T
C L A S S 1
A U D I O
P R O D U C T
SERIAL NUMBER:
P R O D U C T
E I G H T
P O W E R
8
This unit has been
factory set to operate at
the voltage marked
below:
110 - 120V, 60Hz
Fuse Rating: 8A T
220 - 240V, 50Hz
Fuse Rating 6A T
No user serviceable parts
inside.
Refer all work to qualified
personnel.
Do not remove any
panels for risk of electric
shock!
Mains Fuse
:
Ensure correct rating and
type for voltage used!
WARNING: THIS
PRODUCT MUST BE
EARTHED.
Peak Power
Consumption: 550W
MAINS INPUT AC ONLY~
DESIGNED & MANUFACTURED IN HERTFORDSHIRE, ENGLAND
RIGHT OUTPUT
+
_
+
_
LEFT OUTPUT
BALANCED INPUT
LEFT
RIGHT
RCA INPUT
LEFT
RIGHT
BRIDGING
SWITCH
RCA BRIDGED
INPUT
XLR BRIDGED
INPUT
Any cleaning of your
P
RODUCT
8
Power Amplifier should be done with a clean dry cloth or soft bristle brush.
There is no need to polish the gold effects, a simple dry wipe is sufficient.
Do not use any solvent or silicone based cleaning solutions as this may result in tarnishing.
Remember to replace all of your packaging in the box and re-seal. Keep the box for any future transportation of
your product.
