manualshive.com logo in svg

Alcatel ONETOUCH 7048A, Repair Document

Share
Download
Alcatel ONETOUCH 7048A Repair Document Download Page 54

 

L2 Repair Document 

                         

TCL

 Communication Ltd.

 

                     

Rev. 

Go Play 7048X_A Level 2 Repair Document 

Page 

1.3 

54/95 

All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.

 

   

 

 

Step3.

 

Dispensing glue on USB screws and solidify 

 

Glue type: Loctite 5140: (5145 substitute) ; 

 

            

Loctite 5140 (5145 as substitute) for screw glue with syringe. 

             It’s a cost down solution for USB screw glue. 

                   

             

                     

                   

  

          Attention: 

Screw glue need to be correctly positioned to cover correctly the screws, and wait about 

5 

minutes

. 

 Loctite 5140 (substitute 5145) glue cures time: Surface cures tack-free in 1 hour, fully cures in 24 hours

 

 

Summary of Contents for ONETOUCH 7048A
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands