6
7
Getting started
1.2
Set-up
1.2.1
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
To install, place the SIM card with chip facing downwards. Make
sure that it is correctly inserted. To remove the card, press and
slide it out.
Installing or removing the battery
Please power off your phone before removing the battery.
Insert battery into slot until locked in position, then close the
•
battery cover.
Remove battery cover and unlock battery from slot, then remove.
•
Installing or removing the microSD card
To insert external microSD card, slide microSD card metal tray to
right position to unlock, then place microSD card in slot with gold
contact facing down, then slide metal tray to left position to lock
microSD card in place. To remove external microSD card repeat
steps above and remove card, ensure metal tray is in lock position
before replacing battery.
Charging the battery
Connect the battery charger to your phone, then the charging icon
will show on the right of status bar.
The charging icon will not display if your battery is
completely consumed. To reduce power consumption and
energy waste, when battery is fully charged disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce the
backlight time, etc.
IP4533_5020W_QG_Eng_USA_13_130531.indd 6-7
IP4533_5020W_QG_Eng_USA_13_130531.indd 6-7
2013-5-31 9:41:00
2013-5-31 9:41:00