6
7
1�2
Getting started
1�2�1
Set-up
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. You do not need
to power off your phone before inserting or removing the SIM card
as this phone can support hot swap.
Before you install or remove the SIM card, use a pin to press the small
cavity until the SIM cassette pops out.
Your phone only supports micro-SIM card. Do not attempt to
insert other SIM types like mini and nano cards, otherwise
you may damage your phone.
Installing and removing the microSD card
Insert the external microSD card into the slot with the gold contact
facing down until it's locked. To remove the external microSD card,
gently push it until it's unlocked.
Installing SIM card
Inserting or removing the stylus
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
Charging the battery by Magic Flip NRG (WR8020) and pad
(1)
Connect Magic Flip NRG to your phone and position the phone on the
pad so that the cover touches it directly, enabling the phone to charge.
If the cover touches the pad correctly, the pad's charging light will be
on. Notifications of missed calls, events, SMS, etc. will display while your
mobile is charging if you set the screen saver to Charging screensaver
by going to
Settings\Display\Screen saver\Charging screensaver
.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.
(1)
Magic Flip NRG and pad are both optional items.
Removing SIM card
Removing microSD card
Installing microSD card
IP4799_8020A_QG_Eng_US_02_140115.indd 6-7
1/15/2014 4:04:28 PM
