Alcatel omniaccess 4302, Installation Manual

Page: 16 / 32

Overview
Chapter 1
6 OmniAccess 4302 WLAN Switch 031986-00
Installation Guide February 2006
Power Input Socket (on Rear)
The power input socket on the chassis rear panel accepts the DC connector from
the power adapter (included) which connects to a power cord which you plug in
to site power. For proper safety and performance, use the power cord shipped
with the Alcatel OmniAccess 4302 WLAN Switch.
N
OTE
: Use the power adapter supplied with the Alcatel OmniAccess 4302
WLAN Switch. Do not substitute power adapters designed for other
products as this may damage the device or the power adapter.
Rubber Mounting Feet
Four rubber mounting feet stabilize and prevent slippage for placing the Alcatel
OmniAccess 4302 WLAN Switch on a flat surface. (The mounting feet are
included but must be attached by the user.)
5
6