Alcatel omniaccess 4302, Installation Manual

Page: 18 / 32

Installing the Chassis
Chapter 2
8 OmniAccess 4302 WLAN Switch 031986-00
Installation Guide February 2006
Precautions
Installation Requirements
This section describes requirements for the installation of the Alcatel OmniAccess
4302 WLAN Switch.
Location
The Alcatel OmniAccess 4302 WLAN Switch, like other computing devices and
office equipment, requires an “electronics friendly” environment. Because it can
be mounted on any flat, stable surface, select a location where the power and
network connections will not interfere with traffic and office activities.
Space
For proper air circulation, leave at least 10 cm (4 inches) clearance for the vents
on the left and right of the chassis.
Leave additional space in front and back of the chassis to access power cords,
network cables, and indicator LEDs.
C
AUTION
: Never insert foreign objects into the chassis or any other
component, even when the Alcatel OmniAccess 4302
WLAN Switch is unpowered or unplugged.
Power is fully disconnected from the Alcatel OmniAccess
4302 WLAN Switch by unplugging the power cord from
the power outlet. For safety reasons, verify the power
outlet and plug are within easy reach of the operator.
To minimize electrical hazard, keep water and other fluids
away from the product.
Comply with electrical grounding standards.
Do not ship or store this product near strong
electromagnetic, electrostatic, magnetic, or radioactive
fields.
Do not disassemble the chassis. This product has no
internal serviceable parts. When service or repair is
needed, see
“Contacting Alcatel” on page x .