13
14
•
Restart:
Click Restart to restart your device.
•
Wi-Fi Performance Settings
•
Battery life varies with Wi-Fi range and sleep time.
•
Wi-Fi Performance:
•
Economy mode: Increase battery life.
•
High Performance: Extend coverage of the mobile hotspot and still connect to your Wi-Fi network.
This will decrease battery life.
•
Wi-Fi Sleep Settings
•
Sleep Time: when there’s no Wi-Fi connection after a specific time, Wi-Fi will be unavaliable, and the sys-
tem will go into sleep mode for power-saving.
•
Software Updates
•
Click Check for update, you can check whether there is new software or not. If there is new software, you
could select update software or cancel update software.
•
Auto Update
•
On: If there is new software, the device will automatic download and install the software. It will spend
a few minutes to download and install the software.
•
Off: There is no Auto update.
•
Auto-check cycle: the cycle of Auto update.
Firewall
•
IP Filtering:
You can set firewall policies to protect your network from viruses, worms and malicious activities
on the Internet.
•
Port Forwarding:
Configure a Port Forwarding setting to enable external computers to access WWW, FTP or
other services provided by LAN.
•
Port Forwarding Settings
•
LAN IP Address: Specify a computer located at LAN to provide services.
•
LAN Port: Set LAN port numbers to be filtered.
•
WAN Port: Set WAN port numbers to be filtered.
•
Protocol: Protocols applied by services.
•
The maximum number of rules is 10.
•
UPnP Settings:
Universal Plug and Play (UPnP) is a set of networking protocols that allows networked devices,
such as PC, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each
other’s presence on the network and establish functional network services for data sharing, communications,
and entertainment.
•
DMZ Settings
•
If a terminal device can’t run network applications via this Ufi, enter IP address of the terminal device in the
entry box when DMZ is enabled.
•
You can configure DMZ address, enable or disable DMZ on this page.
Router Settings
•
To change the current settings, disconnect from the network first.
