background image

4

UMTS 1/3/8: 24 dBm 
LTE B1/B3/B20/B28: 25 dBm
LTE B7: 25.65 dBm
LTE B8: 24.5 dBm
LTE B38: 25.4 dBm

802.11 b ≤ 20 dBm 
802.11 g/n ≤ 18 dBm
802.11 a/ac ≤ 18 dBm 

Regulatory.information

Hereby, TCL Communication Ltd. declares that the radio equipment type Alcatel 
HH71V1 is in compliance with Directive 2014/53/EU.

Additional information

The full text of the EU declaration of conformity is available at the following 

internet address: http://www.alcatelmobile.com/EU_doc
The description of accessories and components, including software, which allow 

the radio equipment to operate as intended, can be obtained in the full text of 

the EU declaration of conformity at the following internet address: http://www.

alcatelmobile.com/EU_doc

Disclaimer

There may be certain differences between the user manual description and the 

device’s operation, depending on the software release of your device or specific 

operator services.
TCL Communication Ltd. shall not be held legally responsible for such differences, 

if any, nor for their potential consequences. This device may contain materials, 

including applications and software in executable or source code form, which is 

submitted by third parties for inclusion in this device ("Third Party Materials"). 

All Third Party Materials in this device are provided "as is", without warranty 

of any kind, whether express or implied. The purchaser undertakes that TCL 

Communication Ltd. has complied with all quality obligations incumbent upon it 

as a manufacturer of mobile devices and devices in complying with Intellectual 

Property rights. TCL Communication Ltd. will at no stage be responsible for the 

inability or failure of the Third Party Materials to operate on this device or in 

interaction with any other device. To the maximum extent permitted by law, 

TCL Communication Ltd. disclaims all liability for any claims, demands, suits or 

actions, and more specifically – but not limited to – tort law actions, under any 

theory of liability, arising out of the use, by whatever means, or attempts to 

use, such Third Party Materials. Moreover, the present Third Party Materials, 

Summary of Contents for LINKHUB HH71V1































Reviews: