57
LOG
Ö
Select
Status
>
Log
.
The Log tab contains five types of log messages and can be useful for trouble shooting.
Ö
Select the log you want to review and click on the
Change
button.
L
The
Refresh
button adds all new messages sent since the present log was chosen.
Application log
This shows the phone application messages. The log can be filtered from “Fatal” (only
the fatal error messages) to “Trace” (all messages).
The application log can for example be used for troubleshooting LDAP issues. (See the
administrator’s guide at
www.openldap.org
for information about common error codes.)
The
Clear
log
button erases all content in the log.
SIP Trace
The SIP Trace logs the communication between the phone and the SIP PBX.
The
Clear log
button erases all content in the log.
It is possible to disable the SIP trace log
Ö
Select SIP logging
Off
and click on the
Set
button.
CHECKING STATUS AND LOGS