Alcatel-Lucent OmniSwitch 6900 Hardware User'S Manual Download Page 34

Page: 34 / 106

OmniSwitch 6900 Chassis

Chassis and Power Supplies

page 3-4

OmniSwitch 6900 Hardware Users Guide

June 2020

OS6900-X20 and OS6900-X40 Chassis Specifications

Note.

For OS6900-X72 chassis specification, please refer to page

page 3-7

. For OS6900-T20 and

OS6900-T40 chassis specifications, please refer to

page 3-10

. For OS6900-Q32 chassis specification,

please refer to page

page 3-14

Fully populated weights include fan tray, all installable power supplies and expansion modules. These

figures do not include transceivers

Fully populated front panel (no expansion modules).

See individual expansion modules for power

consumption information.

Chassis Width

43.3 cm (17.06 inches)

Chassis Height

4.4 cm (1.73 inches or 1RU)

Overall Chassis Depth

55.9 cm (22 inches)

OS6900-X20 Chassis Weight

7.61 kg (16.8 lb)

OS6900-X20 Chassis Weight (fully populated)

10.21 kg (22.5 lb)

OS6900-X40 Chassis Weight

7.78 kg (17.15 lbs)

OS6900-X40 Chassis Weight (fully populated)

10.86 kg (23.95 lbs)

Power Supply Bays

OS6900-X20 Power Consumption (SFP+ transceivers)

181W**

OS6900-X40 Power Consumption (SFP+ transceivers)

242W**

Operating Temperature (Tmra)

OS6900-X20-F (front-to-rear airflow)
OS6900-X20-R (rear-to-front airflow)
OS6900-X40-F (front-to-rear airflow)
OS6900-X40-R (rear-to-front airflow)

0°C to 45°C (32°F to 113°F)
0°C to 45°C (32°F to 113°F)
0°C to 45°C (32°F to 113°F)
0°C to 40°C (32°F to 104°F)

Storage Temperature

-10°C to +70°C (14°F to 158°F)

OS6900-X20 Temp Warning Threshold (front-to-rear airflow)

64°C (147°F)

OS6900-X20 Temp Warning Threshold (rear-to-front airflow)

58°C (136°F)

OS6900-X40 Temp Warning Threshold (front-to-rear airflow)

68°C (154°F)

OS6900-X40 Temp Warning Threshold (rear-to-front airflow)

60°C (140°F)

OS6900-X20 Temp Danger Threshold (front-to-rear airflow)

72°C (161°F)

OS6900-X20 Temp Danger Threshold (rear-to-front airflow)

70°C (158°F)

OS6900-X40 Temp Danger Threshold (front-to-rear airflow)

82°C (179°F)

OS6900-X40 Temp Danger Threshold (rear-to-front airflow)

70°C (158°F)

Operating Humidity

5% to 95% non-condensing

Storage Humidity

5% to 95% non-condensing

Summary of Contents for OmniSwitch 6900











































































































Search results

Summary of Contents for OmniSwitch 6900

Reviews:

Related manuals for OmniSwitch 6900

Brands by name

Popular brands

Alcatel-Lucent OmniSwitch 6900, Hardware User'S Manual

Search results

Summary of Contents for OmniSwitch 6900

Reviews:

Related manuals for OmniSwitch 6900

Brands by name

Popular brands