Alcatel-Lucent OmniAccess 780 User Manual Download

Page: 54 / 108

Installing the OmniAccess 780

Left running head:
Chapter name (automatic)

Beta

OmniAccess 780 Hardware Users Guide

Alcatel-Lucent

NSTALLING

SER

ODULES

The following sections describe the procedure to install user modules in your
OA-780.

NSTALLING

WITCH

ABRIC

Follow the procedure detailed below to install a Switch Fabric.

Caution:

Always handle the Switch Fabric by the edges and handle; do not touch its
components or connector pins.

Step 1:

Insert the Switch Fabric in slot 24 or slot 25 for redundancy.

Step 2:

Verify that the Switch Fabric is rested on the guide and it rides smoothly in

the slot.

Step 3:

Push the Switch Fabric firmly and hard enough that the ejector lever on

the Switch Fabric locks the Switch Fabric with the slot.

Step 4:

Once the Switch Fabric is locked with the slot, rest the ejector lever on the

face of Switch Fabric and fasten the ejector screws to secure the Switch Fabric
with the slot.

Figure 16: Installing Switch Fabric

EMOVING

WITCH

ABRIC

To remove the Switch Fabric, unfasten the ejector screws and open the ejector
levers in the opposite direction to eject the Switch Fabric from the slot. Once the
Switch Fabric is ejected, pull the Switch Fabric out of the slot.

OmniAccess 780

OA7-SF

Port 0

Port 1

Summary of Contents for OmniAccess 780













































































































Search results

Summary of Contents for OmniAccess 780

Reviews:

Related manuals for OmniAccess 780

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 780, User Manual

Search results

Summary of Contents for OmniAccess 780

Reviews:

Related manuals for OmniAccess 780

Brands by name

Popular brands