6.1.1
When the unit is powered on All front panel LED's glow solidly for
approximately 30 seconds.
6.1.3
After this all of the LED's will turn off with the exception of the Power
light, which will flash a few times before glowing solid. This indicates
that the product has booted. The DSL, LAN and Voice services will
now initialise.
6.1.2
The
LAN
LED will glow steadily once the service has initialised. The
LED will flash to show data activity.
6.1.4
The OmniAccess 5320 BG establishes the DSL link in a two-stage
process:
•
synchronization, during which time the
DSL
LED flashes once a
second (slow)
•
training, during which the
DSL
LED flashes twice a second (fast)
6.1.5
When the link is established, the
DSL
LED goes steady.
If the
DSL
LED continues to flash, please check the rate at which it
is flashing (fast or slow) and contact your service provider.
6.1.6
The
Voice
LED lights up and glows steadily when the voice service is
ready for use.
7
Using your DSL Service
Important!
Alternative arrangements should be made to enable you to contact the
emergency services during a power failure or failure of the DSL service.
7.1
Follow the instructions supplied by your service provider.
10
OmniAccess 5320 BG Series User's Guide
Summary of Contents for OmniAccess 5320 BG
Page 1: ...OmniAccess 5320 BG Business Gateway User s Guide...
Page 14: ...12 OmniAccess 5320 BG Series User s Guide...
Page 19: ......
