Alcatel-Lucent OmniAccess 5305 BG, User Manual

Page: 13 / 16

DSL Line Problem?
Examine the
DSL
LED.
DSL LED status Action to be taken
On steady If your telephone calls are failing, go on to investigate a
Voice Problem .
If you are experiencing Internet access problems, go on to
investigate a
LAN Problem .
Flashing
independently There has been an interruption in the power supply or a
break in the DSL service. After a short while, the LED should
change from fast flashing to steady.
If the LED continues to flash, contact your service provider.
Off Please contact your service provider.
Voice Problem?
Examine the
Voice
LED.
Voice
LED status
Action to be taken
On Check the cable connections between the OmniAccess 5305
BG and your telecommunications equipment. If all cables are
secure, proceed as follows.
Where telephones are plugged directly into the OmniAccess
5305 BG
If you do not hear the dial tone when you go off-hook, please
contact your service provider.
Where call connection is via a PBX
If the PBX connection with the OmniAccess 5305 BG is BRI
(Basic Rate ISDN), please contact your PBX service
engineer.
If the PBX connection with the OmniAccess 5305 BG is
analogue (POTS):
1 Unplug the PBX from the OmniAccess 5305 BG.
2 Plug a telephone directly into a
Voice
port.
3 Go off-hook.
4 If you hear the dial tone, contact your PBX service
engineer.
5 If you do not hear the dial tone, contact your service
provider.
OmniAccess 5305 BG Series User's Guide
11