...................................................................................................................................................................................................
8
If the access point configuration ...
Then ...
supports one LTE cell
go to
supports one WCDMA cell
go to
“WCDMA commissioning” (p. 3-4)
supports Wi-Fi
go to
“Wi-Fi commissioning” (p. 3-5)
...................................................................................................................................................................................................
9
After the 9962 MSEC v1.0 access point has been in a normal system state for fifteen
minutes, all the non-Wi-Fi LEDs are turned off to avoid bringing attention to the unit.
They remain off until one of them changes to an Off-Normal state. As the Wi-Fi LEDs are
managed by the Wi-Fi module they are not included in this procedure but turned off in a
separate procedure.
LTE commissioning
...................................................................................................................................................................................................
1
The 9962 MSEC v1.0 access point starts its LTE auto-configuration and self optimisation
of the radio access. During this operation the LTE status indicator will blink red/green
until the service is operational marked by a solid green LTE status indicator.
Important!
In case the configuration supports only one LTE cell, the WCDMA LED
is off. If the configuration enables LTE and WCDMA concurrent operation, the LTE
and WCDMA commissioning proceed simultaneously.
...................................................................................................................................................................................................
2
Return to the
WCDMA commissioning
...................................................................................................................................................................................................
1
The 9962 MSEC v1.0 access point starts its WCDMA auto-configuration and self
optimisation of the radio access. During this operation the WCDMA status indicator will
blink red/green until the WCDMA service is operational marked by a solid green
WCDMA status indicator.
Alcatel-Lucent 9962 Multi-standard Enterprise Cell v1
commissioning
Commissioning process
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-4
Alcatel-Lucent 9962 MSEC v1.0
3MN-02001-0002-RJZZA
Issue 2.01
September 2015
P
RELIMINARY
P
RELIMINARY
E
N D
O F
S T E P S
...................................................................................................................................................................................................
E
N D
O F
S T E P S
...................................................................................................................................................................................................
