manualshive.com logo in svg

Alcatel-Lucent 8244 DECT Handset, User Manual

Share
Download
Alcatel-Lucent 8244 DECT Handset User Manual Download Page 90

Declaration of compliance 

 

8AL90396ENAAed01 
 

90 /90

 

User Instructions 

Only use the handset in temperatures between -15°C to +55°C (5°F to 131°F).

 

Do not charge a battery 

when the ambient room temperature is above 40º C or below 5º C (above 104º F or below 41 ºF).

 

This 

apparatus is Hearing Aid Compatible (HAC). 

Acoustic shock protection 

Maximum sound pressure level for handset is compliant with European, US and Australian standards. 

Directive 2003/10/EC specifying the risks inherent in noise at work 

The ring contributes towards overall daily noise. To reduce the level, the following is recommended: reduce 
the setting, program a progressive ring. 

Disposal 

The equipment must be returned to a collection point for electronic equipment waste disposal. 

Defective batteries must be returned to a collection point for chemical waste disposal. 

Related Documentation 

other languages for these Safety and Regulatory Instructions and User Documentation are available at the 
following Web site: https://www.al-enterprise.com/products. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
www.al-enterprise.com The Alcatel-Lucent name and logo are trademarks of Nokia used under license by 
ALE. To view other trademarks used by affiliated companies of ALE Holding, visit:  
www.al-enterprise.com/en/legal/trademarks-copyright. All other trademarks are the property of their 
respective owners. The information presented is subject to change without notice. Neither ALE Holding nor 
any of its affiliates assumes any responsibility for inaccuracies contained herein.  
© Copyright 2021 ALE International, ALE USA Inc. All rights reserved in all countries.

Summary of Contents for 8244 DECT Handset































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands