Alcatel-Lucent 8234 User Manual Download | Manualshive

Page: 13 / 80

background image

Getting started

8AL90386ENABed01

13 /76

Replace the cover.

If you are using a 8254 DECT Handset,
please make sure that the lock is correctly
positioned.

2.3 Charging your telephone battery

The charger is sold separately.

2.3.1 Charging the battery on a single charger

Place the handset into the support facing you, as shown in the picture. Plug the USB cable into the AC/DC
adaptor. Plug the AC/DC adaptor into the mains power supply.

The AC/DC adaptor is not provided with the set. Please contact your provider for a recommended AC/DC
adaptator.

Depending on the configuration of the handset, a beep is emitted when charging begins. The battery status
icon flashes and the LED lights up.

•

Green steady: the phone is on the charger and the battery is fully charged.

•

Red steady: the phone is on the charger and the battery is charging.

You can configure how the handset behaves when it is installed on the charger using the settings menu.
Refer to the chapter on configuring your telephone: Adjusting your telephone functions.

«
...
11
12
13
14
15
...
»

Summary of Contents for 8234

















































































Reviews:

No comments

Related manuals for 8234

Brand: Samsung Pages: 2

Brand: Samsung Pages: 62

Brand: Samsung Pages: 48

Brand: Samsung Pages: 33

Brand: Samsung Pages: 2

Focus S SGH-I937

Brand: Samsung Pages: 175

Brand: Samsung Pages: 2

Brand: Samsung Pages: 24

Brand: Samsung Pages: 2

Brand: Samsung Pages: 145

Brand: Samsung Pages: 167

Brand: Panasonic Pages: 45

Brand: TCL Pages: 18

Brand: Ultratec Pages: 114

Brand: Docomo Pages: 469

Brand: i.safe MOBILE Pages: 258

Brand: Ericsson Pages: 56

Brand: C.R. Laurence Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands