Alcatel-Lucent 7950 SR, System Management Manual

Page: 150 / 462

User Management Commands
Page 150 7950 SR OS System Management Guide
config>system>security>user-template
Description This command configures the local home directory for the user for both console and FTP access.
If the URL or the specified URL/directory structure is not present, then a warning message is issued
and the default is assumed.
The no form of the command removes the configured home directory.
Default no home-directory
NOTE: If restrict-to-home has been configured no file access is granted and no home-directory is cre-
ated, if restrict-to-home is not applied then root becomes the user’s home-directory.
Parameters
local-url-prefix [ directory ] [ directory/directory …] — The user’s local home directory URL prefix
and directory structure up to 190 characters in length.
profile
Syntax profile user-profile-name
no profile
Context config>system>security>user-template
Description
This command configures the profile for the user based on this template.
Parameters
user-profile-name — The user profile name entered as a character string. The string is case sensitive
and limited to 32 ASCII 7-bit printable characters with no spaces.
login-exec
Syntax [ no ] login-exec url-prefix: source-url
Context config>system>security>user>console
config>system>security>user-template>console
Description
This command configures a user’s login exec file which executes whenever the user successfully logs
in to a console session.
Only one exec file can be configured. If multiple login-exec commands are entered for the same user,
each subsequent entry overwrites the previous entry.
The no form of the command disables the login exec file for the user.
Default
No login exec file is defined.
Parameters
url-prefix: source-url — Enter either a local or remote URL, up to 200 characters in length, that
identifies the exec file that will be executed after the user successfully logs in.