Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 635 / 674

Cflowd
7750 SR OS Router Configuration Guide Page 635
Cflowd Configuration Management Tasks
This section discusses the following cflowd configuration management tasks:
• Modifying Global Cflowd Components on page 635
• Modifying Cflowd Collector Parameters on page 636
Modifying Global Cflowd Components
Cflowd parameter modifications apply to all instances where cflowd or traffic sampling is enabled.
Changes are applied immediately. Use the following cflowd commands to modify global cflowd
parameters:
CLI Syntax:
config>cflowd#
active-timeout minutes
no active-timeout
cache-size num-entries
no cache-size
inactive-timeout seconds
no inactive-timeout
overflow percent
no overflow
rate sample-rate
no rate
[no] shutdown
template-retransmit seconds
no template-retransmit
The following example displays the cflowd command usage to modify configuration parameters:
Example
: config>cflowd# active-timeout 60
config>cflowd# no inactive-timeout
config>cflowd# overflow 2
config>cflowd# rate 10
The following example displays the common cflowd component configuration:
A:ALA-1>config>cflowd# info
#------------------------------------------
active-timeout 60
overflow 2
rate 10
#------------------------------------------
A:ALA-1>config>cflowd#