Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 115 / 674

IP Router Configuration
7750 SR OS Router Configuration Guide Page 115
mpls-labels
Syntax mpls-labels
Context config>router
Description This command creates a context for the configuration of glocal parameters related to MPLS labels.
static-label
Syntax static-label max-lsp-labels number static-svc-labels number
no static-label
Context config>router>mpls-labels
Description This command enables the range of MPLS static label values reserved for LSPs and for VCs
(pseudowires) to be configured. For LSPs, these ranges only apply to static MPLS-TP paths
configured under config>router>mpls>lsp.
Default
no static-label
Parameters
max-lsp-labels number — The number of static label values that are reserved for use by statically
configured LSPs. THe range is configured as follows: The minimum value of label is always 32.
The maximum value in the range is then 32 +
number . The allowed values of number are as
follows for max-lsp-labels:
Values
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Default
992
static-svc-labels number — The number of static label values that are reserved for use by statically
configured VCs (pseudowires). The range is configured as follows: The minimum value of static
VC label is always [32 + max-lsp- 1]. The maximum VC label value in the range is then
[32 + max-lsp- 1+
number ]. The allowed values of number are as follows for static-svc-
labels:
Values
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Default
16384
multicast-info
Syntax multicast-info-policy policy-name
no multicast-info-policy
Context configure>router
Description
This command configures multicast information policy.