Alcatel-Lucent 7705 SAR, System Management Manual

Page: 270 / 356

Log Command Reference
270 7705 SAR OS System Management Guide
Log Filter Commands
filter
Syntax [ no ] filter filter-id
Context config>log
Description
This command creates a context for an event filter. An event filter specifies whether to forward or drop
an event or trap based on the match criteria.
Filters are configured in the filter filter-id context and then applied to a log in the log-id log-id context.
Only events for the configured log source streams destined for the log ID where the filter is applied are
filtered.
Any changes made to an existing filter, using any of the sub-commands, are immediately applied to
the destinations where the filter is applied.
The no form of the command removes the filter association from log IDs, which causes those logs to
forward all events.
Default
No event filters are defined.
Parameters
filter-id — uniquely identifies the filter
Values
1 to 1000
default-action
Syntax default-action { drop | forward }
no default-action
Context config>log>filter
Description
The default action specifies the action that is applied to events when no action is specified in the event
filter entries or when an event does not match the specified criteria.
When multiple default-action commands are entered, the last command overwrites the previous
command.
The no form of the command reverts the default action to the default value.
Default
default-action forward
Parameters
drop — the events that are not explicitly forwarded by an event filter match are dropped
forward — the events that are not explicitly dropped by an event filter match are forwarded