Alcatel-Lucent 7705 SAR, System Management Manual

Page: 109 / 356

Security
7705 SAR OS System Management Guide 109
numeric — specifies that at least one numeric character must be present in the password. This
keyword can be used in conjunction with the mixed-case and special-character parameters.
However, if this command is used with the authentication none command, the complexity
command is rejected.
special-character — specifies that at least one special character must be present in the password.
This keyword can be used in conjunction with the numeric and mixed-case parameters.
However, if this command is used with the authentication none command, the complexity
command is rejected.
Special characters include: ~!@#$%^&*()_+|{}:”<>?`-=\[];’,./.
health-check
Syntax [ no ] health-check
Context config>system>security>password
Description This command specifies that RADIUS and servers are monitored for 3 seconds each at
30-second intervals. Servers that are not configured will have 3 seconds of idle time. If in this process
a server is found to be unreachable, or a previously unreachable server starts responding, depending
on the type of server, a trap will be sent.
The no form of the command disables the periodic monitoring of the RADIUS and servers.
In this case, the operational status for the active server will be up if the last access was successful.
Default health-check
minimum-length
Syntax minimum-length value
no minimum-length
Context config>system>security>password
Description This command configures the minimum number of characters required for locally administered
passwords, HMAC-MD5-96, HMAC-SHA-96, and des-keys configured in the
config > system > security context.
If multiple minimum-length commands are entered, each command overwrites the previously entered
command.
The no form of the command reverts to the default value.
Default minimum-length 6
Parameters value — the minimum number of characters required for a password
Values 1 to 8