Getting started with the 8378 DECT IP-xBS solution
on OXO
8AL90357ENAAed01
8
/
37
5 Wizard OXO
The wizard hereunder will help to understand which IP-xBS features you should use on the
foreseen deployment.
For an easy deployment only few concepts like PARI CREATION, DYNAMIC IP
CONFIGURATION, xBS AUTO-DISCOVERY, AUTOMATIC AIR SYNCHRONIZATION are
used and most of them are automatic.
Conditions for easy deployment:
✓
Less than 80 xBS
✓
Continuous buildings with no interruption of air synchronization (no branch offices)
✓
No mix with TDM BS
✓
Dynamic IP parameters (CS and xBS are placed in the same DHCP domain)
If any of the above is not fulfilled, it becomes a complex deployment.
For a more complex deployment additional concepts like SYNC CLUSTER, SITE could be
used.
Before using the wizard hereunder, you must have an idea of the number of base stations
needed in the deployment. It can be estimated based on the buildings dimensions, the
number of users and the needed traffic thanks to the rules given in the doc[2]
Note: It is recommended to first work on a paper plan and do a site survey in areas where
air synchronization could be difficult to achieve. Even with only a few 8378 DECT IP-xBS it
is recommended to do a site survey.
