8088 Smart DeskPhone
8AL90342ENAAed01
40 /52
7.20
Modify the associated number
The associated number can be a phone set number, the voice mail number or the pager number.
•
Reach the 'Menu' page.
•
Settings Services Associate
•
Enter your password.
•
Apply
•
Modify
•
Select the new associated number.
o
Enter the new associated number Acceptance of the programming is displayed.
o
Voice mail
o
Speed dial
Acceptance of the programming is displayed.
7.21
The Tandem configuration
This configuration lets you group two sets under a single call number. Your set is then the main set and
the second set, usually a DECT set, is the secondary set. Each set has its own directory number, but the
tandem number is that of the main set. When you receive a call, the two sets ring simultaneously. When
one of the sets answers, the other set stops ringing. When all the lines of the main set are busy, the
secondary (DECT) set does not ring. The secondary set can still be called by its own number, but in this
case, the tandem function will no longer be taken into account. Most of the functions are common to the
two sets, for example: forwarding, meet-me reminder, the various messages, etc., while others are
specific to each set, for example: individual directory, last number redial, out of service, set padlock, etc.
For more information regarding this configuration, contact the person in charge of your installation.
7.22
Create, modify or consult your intercom list (max. 10 numbers)
•
Reach the 'Menu' page.
•
Settings Services Interphony
•
Follow the on-screen instructions.
7.23
Installing a Bluetooth® Wireless Technology handset (pairing)
Before a Bluetooth® headset can be used, it must be correctly paired to the terminal.
•
•
Bluetooth
•
Mark the Bluetooth® checkbox if it is unmarked.
•
With the handset turned off, press the 2 Bluetooth® handset keys at the same time (long
press).
You will hear a 3 note signal and the LED will flash green and orange alternately.
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed.
•
Select the relevant equipment. The handset is seen as a Bluetooth® headset.
•
The 3-note tone indicates that the handset has been installed correctly (the LED flashes green or
orange depending on the battery charge level). The LED flashes green or orange depending on
the battery charge level.
•
Go back to the Homepage.
