QUICK PROGRAMMING GUIDE 905-RG
ENG
Set the programming switch of the 905-RG module to the OFF position. The programming
indicator light will now go out.
Frequency
471.25
MHz
Attenuation
14
dB
Cell ID
0
READ
T
T
OK+
TS
+OK+T
o
Input level
BER
OK
< 1E-7
READ
Program by
Channel
Channel
Frequency
Channel table
BG CCIR
Channel
21
OK+
TS
+OK+T
OK+
TS
+OK+T
T
OK+
TS
+OK+T
o
Output
Off set
0
0
+1/6
-1/6
+2/6
-2/6
+3/6
-3/6
MHz
OK+
TS
+OK+T
Modulation
64QAM
FEC
7/8
READ
READ
Guard interval
1/32
READ
If the output is programmed by frequency, enter the
frequency using the numeric keypad. Then press T to
transmit.
Enter the attenuation at the output of the module
using the numeric keypad. Then press T to transmit.
Cell identifi er of the input signal.
When the input channel data have been entered, press
the READ key to obtain a reading of the input signal.
Select the programming mode for the output of the
module: channel or frequency. Then press T to transmit.
Select the standard for the output channel. Then press
T to transmit.
If the output is programmed by channel, it is possible to
enter the channel using the numeric keypad. Alternatively,
you can select a channel from the pull-down list. When
you have confi rmed your choice by pressing OK, press
T to transmit.
Select the offset of the output frequency from the options
available. Then press T to transmit.
Type of modulation of the input channel.
Input forward error correction rate (FEC).
Guard interval of the input signal.
