QUICK PROGRAMMING GUIDE 905-RG
ENG
Start/on
912-TT Transmodulator DVB-S/S2 a DVB-T
905-RG Regenerator DVB-T/H
Select series
Confi gure module
905-RG Regenerator DVB-T/H
Transcodifi cador 912 QPSK - COFDM
NIT table
Select Series
Main menu
Press the Power On key of the PS-011 to start up the
system.
Set the programming switch of the 905-RG module to the ON position. The programming
indicator will now light up and remain lit.
Choose
Select Series
to select the programming series.
Select the series: 905-RG Regenerator DVB-T/H.
To commence programming the module, select
Confi gure
module
.
Standard DVB-T/H for input channel.
OK
OK
OK
Input
READ
Program by
Channel
Channel
Frequency
Select the programming mode for the input of the module:
channel or frequency. Then press T to transmit.
OK+
TS
+OK+T
Channel table
BG CCIR
Channel
21
Select the standard for the input channel. Then press T
to transmit.
If the input is programmed by channel, it is possible to
enter the channel using the numeric keypad. Alternatively,
you can select a channel from the pull-down list. When
you have confi rmed your choice by pressing OK, press
T to transmit.
OK+
TS
+OK+T
T
OK+
TS
+OK+T
o
Off set
0
0
+1/6
-1/6
+2/6
-2/6
+3/6
-3/6
MHz
If the input is programmed by frequency, enter the
frequency using the numeric keypad. Then press T to
transmit.
Select the offset of the input channel from the options
available. Then press T to transmit.
OK+
TS
+OK+T
T
Bandwidth
MHz
8
Select the bandwidth of the input channel: 6, 7 or 8 MHz.
You can do this using either the numeric keypad or the
pull-down menu. Then press T to transmit.
OK+
TS
+OK+T
T
o
Standard
DVB-T
Frequency
471.25
MHz
Number of carriers mode in the input channel.
READ
Mode
8K
