— 13 —
— 12 —
INSTALLATION
Installing the Camera(s)
y
Screw antenna clockwise into rear of
the camera.
U
Connect one end of an AC adapter to
the camera’s power pigtail and plug the
other end of the adapter to a 120 volt AC
(standard indoor) power outlet.
V
Make sure the Power status LED turns
red and the Link Status LED turns green.
If it doesn’t, try reconnecting the AC
adapter, and make sure the power outlet
is not controlled by a wall switch.
You should now have video on your Live
screen. If you do not have video, pair the
cameras as described on page 22.
Repeat steps for additional camera(s).
TIP:
Pair additional cameras as shown on page 22.
Power Status
LED
Link Status
LED
