40392 Assembly Instructions
Page 3
ASSEMBLY INSTRUCTIONS
1.
Assemble legs to cabinet bottom using 1/4-20 x 1” screw
and 1/4" washer on the outside of the cabinet. On the
inside, use 1/4" rubber washer, 1/4" washer and 1/4-20 hex
nut. Once the legs are attached, place 1-1/4" plastic plug in
bottom.
2.
Assemble frame according to numbers using 1/4-20 x 1/2”
screws, 1/4” washers and 1/4-20 hex nuts.
3.
Place cabinet bottom in frame and attach cabinet to frame.
4.
Attach 23” support strap to each side using 1/4-20 x 1/2”
screw, 1/4” washers and 1/4-20 hex nut. Strap goes from
top back frame to side of cabinet.
5.
Place cabinet lid on cabinet bottom and attach 3 hinges
using 1/4-20 x 1” screw, 1/4” washer and 1/4-20 hex nut.
6.
Install light kit, according to instructions, onto left side of
cabinet lid. Install light bulb (not included) 60 watt maximum.
7.
Install grate, pick-up tube, hose and siphon gun.
8.
Install gloves using 4-1/2" – 6-1/2” clamps.
AIR COMPRESSOR RECOMMENDATION:
To permit efficient operation of your air compressor, follow these guidelines:
1.
Use a smaller size nozzle and air jet to control the demand of air.
2.
Do not blast continuously. Stop blasting operation periodically to allow the compressor to
cool. No compressor is designed to constantly run at full RPM. Use 70% of the rated output.
3.
Use a minimum 1/2” air hose or metal piping from your air compressor to the blaster. If your
compressor is creating an excessive amount of moisture, we recommend using a water trap
