40392 Assembly Instructions
Page 13
Coal Slag # 40093
Coal Slag is used when paint and rust has to be removed from steel, such as car bodies, tanks or
heavy machinery. Coal Slag is faster cutting, can be re-used, is moisture free, and will not pack or
absorb moisture. (25 Lb. container)
Steel Grit #40109
Steel grit is extremely fast cutting on rusty metal and hard to remove paint. Steel Grit is popular
because it leaves a very smooth finish. It is also comparable in price to most other specialty
abrasives. Steel Grit is recommended in reclaim systems or cabinets. (25 Lb. container)
Glass Bead #40105
Glass Bead is used in creating a satin or matte finish. Glass Bead is recommended in reclaim
systems or cabinets. (25 Lb. container)
Aluminum Oxide #40098
Aluminum Oxide is a high quality abrasive that is sharper than sand (not recommended) and cuts
twice as fast as sand. It leaves a smooth textured finish with no pits or burrs. Aluminum Oxide is
rougher than glass bead and can be used over and over again. It is one of the most economical
abrasives you can use in any reclaim systems or cabinets. (4/25 Lb. container)
Plastic Grit #40110
Primarily used to strip aluminum and fiberglass. Great for stripping paint, light oxidation and surface
rust. Recommended for use in blast cabinets because it creates very little dust. Works quickly, last a
long time and increases visibility within the cabinet. (10 Lb. container)
Walnut Shells #40112
Walnut shells are recommended for use on “soft” surfaces such as aluminum, glass, wood, and
other areas where no pitting is desired. Leaves a smooth, dull finish. (10 Lb. container)
