For the case of using the Wi-Fi network you will
see this screen that
list two options for you, the Load profile and
Search network option respectively.
The Load profile option let you load back a profile that you have
saved in the previous section, please use the
Tune/ OK
Knob
to
navigate and select it. If the saved profile has the correct information
that
match to the current AP you are going to connect to,
product
will try to
connect to it and put a tick beside the AP name once the
product
successfully connected to the AP.
To search for a new wireless Access Point before
using the Wi-Fi
connectivity, please select the Search network from the
above screen.
Then you will see a screen showing “Searching” while
the product
trying to search and show you all the available Access
Points that the
product
able to find. The product will
then show all the Wi-Fi networks SSID in the range as
shown in the screen for example.
Once you have got the list of Wi-Fi AP SSID’s use
Tune/OK
to navigate and select the AP SSID that
you wish to use. Once the network AP is selected the
radio will prompt you for the default network key
which is the WEP/WPA default secure key of the
Wi-Fi network access point.
4