Albrecht DB 270, User Manual, Page: 34 / 88

Introduction
Thanks for buying the ALBRECHT DB 270 transceiver.
This transceiver offers latest design, multi-functionality, stable performance and easy
operation. Even if the transceiver has a lot of menu functions, the most basic functions can be
found very easily and are self-explaining We believe you will be pleased with the high quality
and dependable features for all your communication needs.
User Safety, Training, and General Information
READ THIS IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION
BEFORE USING YOUR ALBRECHT DB 270 PORTABLE TWO-WAY RADIO.
Compliance with RF Energy Exposure Standards
Your ALBRECHT DB 270 two-way radio is designed and tested to comply with a number of
national and international standards and guidelines (listed below) regarding human exposure
to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and
ICNIRP exposure limits for occupational/controlled RF exposure environment at duty cycles
of up to 50% talk-50% listen and should be used for occupational use only. In terms of
measuring RF energy for compliance with the
FCC exposure guidelines, your radio radiates measurable RF energy only while it is
transmitting (during talking), not when it is receiving (listening) or in standby mode.
NOTE:
The approved batteries supplied with this radio are rated for a 5-5-90 duty cycle (5% talk-5%
listen-90% standby), even though this radio complies with the FCC occupational RF exposure
limits at duty cycles of up to 50% talk.
Your ALBRECHT DB 270 two-way radio Complies with the following of RF energy exposure
standards and guidelines:
•
United States Federal Communications Commission, Code of Federal Regulations;
47CFR part 2 sub- part J
•
American National Standards Institute (ANSI)/Institute of Electrical and Electronic
Engineers (IEEE) C95. 1-1992
•
Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition
•
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
•
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment
RF energy exposure limits in the above standards and guidelines, users should transmit no
more than 50% of the time and always adhere to the following procedures:
Transmit and Receive
To transmit (talk), push the Push-To-Talk (PTT) button; to receive, release the PTT button.
Hand-held radio operation
Hold the radio in a vertical position with the microphone 5 cm away from the lips and let the
antenna radiate free (not cover by hands) and farther away from your head.
Body-worn operation
Always place the radio in an ALBRECHT DB 270 approved clip, holder, holster, case, or
body harness for this product. Use of non- ALBRECHT DB 270 -approved accessories may
exceed FCC RF exposure guidelines.