Albrecht ATT 100 User Instructions Download Page 8

 

 

SAVE 

Battery saver circuit. Should be ON. 
 

K TONE  

Key tone on/off. Recommended: OFF 
 

APO (

Auto Power Off) 

Automatic Power off, when radio is not used for some time. Recommended: OFF 

 
TOT (Recommended : OFF) 

Time-Out-Timer:  maximum  allowed  transmit  time.  Disables  transmitter  after  selected 
transmit  time.  To  continue  transmitting,  it  is  necessary  to  release  1  x  the  PTT  button  for  a 
moment, before you can start a new transmission period.  

 
VOX (Recommended: OFF) 

Automatic  Voice  control  (handsfree).  Selections:  OFF-1,2,3,4.  In  position  4  the  voice 
detection has the highest sensitivity. We do not recommend to use VOX operation, because 
it  is  necessary  to  perform  a  personal  training  process  to  learn  a  speech  behaviour  which 
avoids lost sillables or words at the beginning of talking.  

 
FM RET (Recommended: OFF) 

Automatic  restart  of  Broadcast  radio  after  radio  communications  have  been  finished.  Not 
recommended to use by tour guides, because increased power consumption (no power save 
in silent periods)! 
 

PC Programming (only for Service)

  

A  programming  kit  can  be  connected  to  the  radio  and  allows  activation  /  deactivation  of 
certain  functions  as  well  as  other  channel  frequencies  within  the  range  400….470  MHz 
(national  regulations  may  request  license  application).  Connection  of  PC  programmer  via 
MIC socket and Modem cable (optional accessory item)  
 

Conformity to European Standards and Directives 

Alan  Electronics  declares  the  conformity  with  European 
Directives and harmonized technical standards EN 300 296 V 
1.3.1,  EN  301  489-1  V  1.8.1,  EN  301  489-3  V.1.3.1  und  EN 
60 950-1: 2006 Ed 2 for PMR 446 radio communication. The 
radios carry the CE mark and may be used in all EU member 

states  and  other states  where  the  R&TTE  regulations  are  applied  (incl.  IS,  N,  CH, FL)  and 
TR . 
Radios  which  are  defective  or  not  used  any  more  must  be  recycled  properly  according  to 
European rules, not any more via household trash, but only via public recycling stations. 

 

All original documents are provided for download any time from  
http://service.alan-electronics.de  
 

 
 
 
 
© 2015

 

Alan Electronics GmbH 

Summary of Contents for ATT 100









Reviews: